Solar Gard Armorcoat 8-mil Clear

About Armorcoat 8-mil Clear

Armorcoat 8-mil Clear pairs Solar Gard Armorcoat's 8 mil safety construction with a clear, high-visibility finish with 88% VLT. The single-pane data lists 88% VLT, up to 21% heat rejection, and over 99% UV blocking, so this SKU is best understood as glass-retention film with a specific appearance rather than a generic tint. Eight mil is the commercial workhorse in the Armorcoat range, giving significantly more retention than 4 mil without tinting the glass.

It fits Center City office entries, Old City storefronts, government lobbies, school entrances, and ground-floor commercial glass where sightlines must remain open. The local Philadelphia use case is practical: exposed glass can break during impact, vandalism, attempted entry, or severe weather, and owners often need a retrofit that improves retention without replacing the whole glazing system.

Technically, the heavier 8 mil construction improves fragment retention and forced-entry delay compared with entry-level films, especially when the glass and frame can support an attachment detail. Armorcoat safety film helps retain glass fragments and delays forced entry when it is matched to the glass type, frame condition, and any required wet-glaze or attachment system. It should never be presented as absolute protection. For most projects, the film thickness decision should follow the risk level, opening size, and whether the location is interior or street-facing.

Choose it over 4 mil Clear when the risk profile is commercial or street-facing; choose tinted 8 mil versions only when privacy, glare, or solar control are part of the same scope. The result is a more specific specification: Armorcoat 8-mil Clear is selected for its thickness, finish, daylight level, and risk profile together.