Solar Gard Armorcoat 7-mil Clear

About Armorcoat 7-mil Clear

Armorcoat 7-mil Clear pairs Solar Gard Armorcoat's 7 mil safety construction with a clear finish with 88% VLT and no intentional color change. The single-pane data lists 88% VLT, up to 21% heat rejection, and over 99% UV blocking, so this SKU is best understood as glass-retention film with a specific appearance rather than a generic tint. It is a practical middle step for projects that need more retention than 4 mil but do not require the heavier commercial 8 mil standard.

It is useful for Philadelphia homes, residential sidelites, small offices, and school interior glass where a clear safety upgrade needs more body than entry-level film. The local Philadelphia use case is practical: exposed glass can break during impact, vandalism, attempted entry, or severe weather, and owners often need a retrofit that improves retention without replacing the whole glazing system.

Technically, seven mil construction helps retain fragments with more mass than 4 mil, while staying transparent enough for interior partitions and doors. Armorcoat safety film helps retain glass fragments and delays forced entry when it is matched to the glass type, frame condition, and any required wet-glaze or attachment system. It should never be presented as absolute protection. For most projects, the film thickness decision should follow the risk level, opening size, and whether the location is interior or street-facing.

Choose it over 4 mil Clear for a stronger residential or light-commercial upgrade; choose 8 mil Clear when the location is street-facing or higher risk. The result is a more specific specification: Armorcoat 7-mil Clear is selected for its thickness, finish, daylight level, and risk profile together.