Solar Gard Armorcoat 8-mil Stainless Steel 35 Clear

About Armorcoat 8-mil Stainless Steel 35 Clear

Armorcoat 8-mil Stainless Steel 35 Clear pairs Solar Gard Armorcoat's 8 mil safety construction with a warm stainless finish with 37% VLT for moderate privacy. The single-pane data lists 37% VLT, up to 50% heat rejection, and over 99% UV blocking, so this SKU is best understood as glass-retention film with a specific appearance rather than a generic tint. It is the balanced stainless option: heavier Armorcoat retention with a visible but not overly dark architectural tint.

It suits professional offices, healthcare reception glass, university buildings, and storefronts where stainless hardware or warmer facades make silver too cold. The local Philadelphia use case is practical: exposed glass can break during impact, vandalism, attempted entry, or severe weather, and owners often need a retrofit that improves retention without replacing the whole glazing system.

Technically, eight mil construction helps retain broken glass and delays forced entry, while the 37% VLT finish keeps more daylight than darker stainless variants. Armorcoat safety film helps retain glass fragments and delays forced entry when it is matched to the glass type, frame condition, and any required wet-glaze or attachment system. It should never be presented as absolute protection. For most projects, the film thickness decision should follow the risk level, opening size, and whether the location is interior or street-facing.

Choose it over Stainless Steel 50 when privacy needs to be visible; choose Stainless Steel 20 when screening and glare control need to be stronger. The result is a more specific specification: Armorcoat 8-mil Stainless Steel 35 Clear is selected for its thickness, finish, daylight level, and risk profile together.